First, Global 4G Bands 4G module installed
Second, 10Gb eSIM data for your first usage
When you run out this eSIM data, if you think it is good, you can recharge it. And if you sell this products to your clients, everytime they recharge, you will get commission.
ZBT-WE2805-A is a 4G routing product for home used. It accesses the Internet through 4G mobile communication dial-up or 100Mbps WAN port dial-up, and then shares the wireless WiFi and internet network to user or device.
And also,it can be supported wired Ethernet. Customers can be connected WAN port by wired Ethernet cable to share wireless WiFi and wired network to user or device.
● Adopt MT7628NN chipset,MIPS24KEc architecture CPU,main frequency is up to 580MHZ
● Support 2.4G, rated up to 300Mbps
● Support 802.11 N/G/B protocols.
● MT7628NN chipset integrates 64MB DDR2, match with 8MB Nor Flash
● 1*WAN and 3*LAN 100Mbps adaptive network port, support automatic flip(Auto MDI/MDIX)
● Support "one-click flash mode",Long press the reset button to boot and then will enter the rescue flash mode
● Built-internal 4G module to support 3G&4G function,
● One standard SIM card slot, support SIM/USIM card
● External high gain omnidirectional antenna with 360o wireless signal
● This product supports hardware watchdog function, when the routing system fails, it will restart the device automatically.
Processor | Adopt MT7628NN Chipset,MIPS24KEc architecture CPU,main frequency is up to 580MHZ |
2.4G WIFI chip | MT7628NN chipset integrates 2.4G WIFI function, rated up to 300Mbps |
RAM | DDR2 64MB |
FASH | Nor Flash 8MB |
Do not support NAND Flash |
Network port | 1*WAN,100Mbps support automatic flip(Auto MDI/MDIX)
IEEE 802.3/802.3u,802.n/g/b |
2*LAN,100Mbpssupport automatic flip(Auto MDI/MDIX)
IEEE 802.3/802.3u,802.11n/g/b |
|
SIM card slot | 1*SIM slot,support SIM/USIM.. |
Power | DC5.0*2.1MM port |
Reset button | 1* reset button |
Antenna | 2*2.4G & 5dbi external Omnidirectional antennas |
2*4G 5dbi internal Omnidirectional antennas | |
4G module interface |
It is directly SMT LCC+LGA 4G module to support 3G&4G function. |
WAN LED |
Connect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED |
LAN1 LED |
Connect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED |
LAN2 LED |
Connect to the Internet port, the indicator will be always light, and it will flash when there is data communication, the network port with LED |
2.4G WIFI LED |
Turn on 2.4G WIFI function,the indicator will be always light, and it will flashes when there is data communication, Turn off 2.4G WIFI or 2.4G WIFI function fails, the indicator will be off. The first light on the left side of the upper row |
4G LED |
Fast flashing (on and off once in 600ms):No SIM card or network registration failed Slow flashing (once at 3000ms and off once at 75ms):Standby mode Fast flashing (on and off once in 75ms):Dialing is normal, data link is established Constant light:Sleep state |
Power LED |
It is always on when the power is connecting, and it will be off when the power supply is faulty or is not connected to the power.,The first light on the left side of the below row |
Skype: zbt12@zbt-china.com
Whatsapp/phone: +8618039869240