China ZBT S600 WiFi 5G Router With Sim M2 interface Openwrt Dual Band DDR4 MU-MIMO factory and suppliers

ZBT S600 WiFi 5G Router With Sim M2 interface Openwrt Dual Band DDR4 MU-MIMO

Short Description:

S600 is 5G CPE product for home/office/enterprise using. It accesses the Internet through 5G mobile communication dial-up or 1000Mbps WAN port dial-up, and then shares the Internet network through wireless WiFi 6 and 1000Mbps wired LAN.

Send email to us

Product Detail

Contact us

Product Tags

Video

Simply Introduction

This product has built-in m.2 interface, which can be used to expand 5g mobile communication function. The built-in m.2 interface supports USB3.0 bus. Whether the 5g mobile communication supports NSA or SA and what frequency band it supports are decided by the 5g module.

Main features of the product

• Adopt IPQ8072A chipset solution, Quad core Arm Cortex A53s CPU, the main frequency is up to 2.2 GHz

• Adopt independent WiFi chip, qcn5024 chipset for 2.4G, qcn5054 for 5.8G

• 2.4G rate up to 1147Mbps, 5.8G rate up to 2402Mbps, 2.4G&5.8G supports MU-MIMO

• High speed 1GB DDR4 with 8MB nor flash and 256MB EMMC storage

• 1*WAN, 2*LAN all 1000M adaptive network ports, support automatic flip (Auto MDI/MDIX)

• Built-in M.2 standard interface, can be used to connect 5G mobile communication module.

• External standard SIM card interface, support SIM/USIM card

• 5g module power supply is independently controlled by GPIO

• IPQ8072 is with watchdog function, which can reboot automatically in case of crash.

• External high gain omnidirectional antenna, wireless signal 360 degrees without dead angle.

• All LED lights can be turned off by one button.

Hardware interface introduction

Introduction of watchdog function

When the routing system runs normally, but the 5g module dials not normally, the routing system will automatically restart the 5g module by controlling the power supply of the 5g module to repair the 5g dialing not normally.
When the system is not normal, the watchdog function of ipq8072a will restart the whole system.

Software configuration information

Default IP	192.168.1.1
Username Password	root/admin
2.4G SSID	WIFI-XXXXXX (X is the last 6 digits of MAC address), no password by default
5.8G SSID	WIFI-5G-XXXXXX (X is the last 6 digits of MAC address), no password by default