• sing_product_banner

Products

IPQ4019 chipset Powerful 3 SIM card 4G LTE Wireless Router Dual Bands 2.4Ghz and 5.8Ghz Gigabit Ports

Short Description:

WG1402 is a Three SIM cards 3G 4G LTE routing product, it is developed for high network security, it accesses the Internet through any 4G sim card or through 1000Mbps WAN port, and then shares the Internet network via wireless WiFi 5 or 1000M LAN Ports.


Product Detail

Contact us

Product Tags

Simple introduction

WG1402 is a Three SIM cards 3G 4G LTE routing product, adopting IPQ4019 powerful Qualcomm Chipset, it is developed for high network security, accesses to the Internet through any 4G sim card or through 1000Mbps WAN port, and then shares the Internet network via wireless WiFi 5 or 1000M LAN Ports.

Selling Point

Adopting Qualcomm chipset IPQ4019, quad-core ARM Cortex-A7 CPU, main frequency up to 800MHZ
The main chipset IPQ4019 integrates 2.4Ghz and 5.8Ghz wifi bands, both 2.4Ghz and 5.8Ghz support MU-MIMO
Using High Speed configuration, 256MB DDR3, 32MB Nor Flash
1WAN and 4LAN, all 1000M adaptive network ports, support automatic flip (Auto MDI/MDIX)
Supporting USB3.0 storage device, can be used to expand SMABA or FTP network storage function
Support "One-key flash mode", that is, when the reset button is long pressed, the router will enter to the upgrading firmware mode
Built-in 3*mini-PCIe slots, it can be installed maximum 3pcs 4G modules
Supporting 3pcs Nano SIM slot, supports SIM/USIM
With external removable SMA Port high gain omnidirectional antennas, realizing all-round wifi coverage

Working Environment

Operating temperature 0℃ -40℃
Storage temperature -40℃-70℃
Operating humidity 10% -90%RH Non-condensing
Working humidity 5%- 90%RH Non-condensing

Hardware

Processor IPQ4019 Chipset, Quad Core ARM Cortex-A7 CPU, main frequency 761.8MHZ
2.4G WIFI IPQ4019  integrated 2.4G WIFI baseband, IEEE 802.11n/g/b, 400mps
5.8G WIFI IIpq4019 integrated 5.8G WiFi baseband, IEEE 802.11a/ac, 867mbps
RAM DDR3  256MB
Flash Nor Flash  32MB
NAND Flash (Support Customizable firmware)
Ethernet interface 1* Wan port, 1000Mbps, Support Auto MDI/MDIXProtocol: IEEE 802.3/802.3u/802.ab
4* Lan ports, 1000Mbps, Support Auto MDI/MDIXProtocol: IEEE 802.3/802.3u/802.ab
USB 1*USB3.0
SIM slot 3*Standard Nano SIM card slot(Smalleset sim card),support Nano SIM/USIM
Powder interface DC5.0*2.1MM DC port
Botton 1*reset button
Antennas 2*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas
6*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas
PCIE Built-in 3*4G PCIE module interfaces ,Support install 3pcs 4G module at the same time
LAN1LAN2

LAN3

LAN4 

Light on: connect the network portFlashing: data is communicating
WAN Light on: connect the network portFlashing: data is communicating
Power Light on: Power onLight off: power supply is not connected or failed

5.8G WIFI

Light on: always on when 5.8G WiFi function

Light flashing: data is communicating

Light off: 5.8G WiFi is not turned on or 5.8G WiFi is faulty

2.4G WIFI

Light on: always on when 2.4G WiFi function

Light flashing: data is communicating

Light off: 2.4G WiFi is not turned on or 2.4 WiFi is faulty

4G1 4G2

4G3

Light on: 4G module is workingLight off: 4G module is not installed or 4G module is faulty

 

oftware Configuration Information

Default IP 192.168.1.1
Usres/Password root/admin
2.4G SSID WIFI-XXXXXX (X is the last 6 Number of MAC address), no password by default
5.8G SSID WIFI-5G-XXXXXX (X is the last 6 Number of MAC address), no password by default

 

WG1402
WG1402-2
WG1402-4
WG1402-6
WG1402-1
WG1402-3
WG1402-5
WG1402-7
WG1402-8

  • Previous:
  • Next:

  • Skype: zbt12@zbt-china.com

    Whatsapp/phone: +8618039869240

  • Write your message here and send it to us